Ham radio glossary
237 words, abbreviations and Q-codes you’ll meet on the air. They come from the word lists behind our daily puzzles, like Callword and Callwordless. Tap a word to see what it means, where the meaning comes from, and related guides.
A
- ABT about
- AGC Automatic gain control: keeps the receiver volume steady as signals get stronger and weaker.
- AGN again
- Amateur Amateur radio means radio done for the love of it, not for pay. That is the 'amateur' in ham radio.
- Amp Short for amplifier, which boosts your signal. Also short for ampere, the unit of current.
- AMSAT AMSAT is the Radio Amateur Satellite Corporation, which builds and supports ham satellites.
- ANT antenna
- Antenna The part of the station that turns your signal into radio waves and catches incoming ones.
- AR end of transmission or message
- Array An antenna array: several antennas working together for more gain or direction.
- AS please stand by
- Audio The sound part of a signal. Digital modes like FT8 send audio tones over the radio.
- Aurora The northern or southern lights. Hams bounce VHF signals off aurora, and CW signals that do sound raspy.
B
- B4 before
- Balun A device that connects a balanced antenna (like a dipole) to unbalanced coax. The name comes from…
- Band A range of frequencies set aside for a use, like the 20 meter band (14.000-14.350 MHz).
- Battery Portable stations often run on batteries. LiFePO4 batteries are popular for field operating.
- Beacon A station that transmits on its own so others can check propagation. The NCDXF beacons take turns on HF from…
- Beams Directional antennas, like Yagis, that focus your signal one way.
- BK break, or back to you
- Booms The boom is the support that holds the elements of a Yagi.
- Bug A semi-automatic Morse key that sends dits on its own while you make the dahs by hand.
C
- Cable Coaxial cable (coax) carries your signal between radio and antenna.
- Calls Call signs identify every licensed station, like W1AW.
- Cards QSL cards: postcards hams send to confirm a contact.
- Carrier The steady signal a transmitter puts out. AM sends a carrier; SSB removes it.
- CFM confirm
- Chaser In SOTA, a station that works summit activators.
- Chirp A Morse signal whose pitch slides as each dit or dah starts. Also the name of free radio-programming software.
- Choke A coil of coax (often on ferrite) that stops RF current from flowing on the outside of the coax shield.
- CL closing, going off the air
- Class Your license class (Technician, General, Extra) sets which frequencies you may use.
- Clubs Ham radio clubs host meetings, license exams, and events like Field Day.
- Cluster A DX cluster is a network where hams post spots of stations they hear.
- Coax Coaxial cable: a center wire inside a shield. The most common feed line between a radio and its antenna.
- Codes Q-codes like QTH (location) and QSL (confirm) are radio shorthand.
- Coil A coil of wire (an inductor). Coils load short antennas so they resonate, and coiled coax can make a choke.
- Contact A two-way exchange with another station. Hams also call it a QSO.
- Contest An on-air event where stations try to make as many contacts as they can in a set time.
- Cootie A sideways Morse key that sends on both strokes. Also called a sideswiper.
- CQ calling any station
- CUL see you later
- Current The flow of electricity, measured in amps.
D
- Dah The long sound in Morse code, three times as long as a dit. The letter T is a single dah.
- DE from, this is
- Decibel A ratio unit (dB). Every 3 dB is about double the power; every 10 dB is ten times the power.
- Dials The tuning dial (VFO) sets your frequency.
- Digital Digital modes like FT8, RTTY and PSK31 send data instead of voice or hand-sent Morse.
- Diode A part that lets current flow one way. Used in radios to detect and rectify signals.
- Dipole An antenna split into two halves with the feed line in the middle. A half-wave dipole is about 468 divided by…
- Dit The short sound in Morse code. The letter E is a single dit.
- DN slant mark (/), as in a portable call sign
- Doppler The shift in frequency as a satellite moves toward or away from you. Satellite operators retune to follow it.
- Drift When a radio's frequency slowly wanders, usually as it warms up.
- DSP Digital signal processing: using software math to filter noise and shape signals.
- Ducting Tropospheric ducting: weather layers trap VHF and UHF signals and carry them hundreds of miles.
- Dummy A dummy load: a resistor you transmit into so you can test without putting a signal on the air.
- Dupe In a contest, a duplicate contact: working the same station again on the same band and mode. It usually earns…
- Duplex Transmitting and receiving on different frequencies, the way a repeater works.
E
- Earth Ground. Earth connections matter for safety and for vertical antennas.
- Element One of the rods or wires that make up an antenna, like the driven element or a director on a Yagi.
- Elmer A ham who mentors new hams. Every new ham deserves a good Elmer.
- ES and
- Exams License exams in the US are given by volunteer examiners (VEs).
- Extra Amateur Extra is the highest US license class, with the most frequency privileges.
F
- Fade When a signal slowly gets weaker and stronger as propagation changes. Hams also call it QSB.
- FB fine business, excellent
- Ferrite A magnetic ceramic material. Ferrite beads and cores are used to make chokes and baluns.
- Field ARRL Field Day: every June, hams set up stations outdoors to practice emergency operating.
- Filter A circuit that passes some frequencies and blocks others, like a narrow CW filter in a receiver.
- Flare A burst of energy from the sun that can wipe out HF signals on the daylight side of Earth.
- Fox In a fox hunt, hams use direction-finding gear to track down a hidden transmitter.
G
- Gain How much an antenna focuses signal in one direction compared with a reference antenna, measured in dBi or dBd.
- GB good-by
- GE good evening
- GM good morning
- GN good night
- Grid A Maidenhead grid square, like EN52: a short code for your location used in logs, contests and VHF work.
- Ground The earth connection for your station, important for safety and lightning protection.
H
I
K
- Key A switch used to send Morse code by hand.
- Keyer An electronic circuit that turns a paddle into perfectly timed Morse dits and dahs.
- Keying Turning a transmitter on and off to send Morse code.
- KN only the called station transmit
- Knobs The controls on a radio. Big tuning knobs make finding signals easier.
L
- Ladder Ladder line: two parallel wires held apart by spacers. A low-loss feed line.
- Legal The legal limit for most US ham bands is 1,500 watts PEP.
- License Your permission to transmit. US hams earn Technician, General or Amateur Extra licenses by passing exams.
- LID a poor operator
- Linear A linear amplifier boosts your radio's output without distorting it. Hams often just call it an amp.
- Links A linked dipole uses connectors (links) in each leg so you can change bands.
- Lobe A part of an antenna's radiation pattern where the signal is strongest.
- Log Your record of contacts: call sign, date, time in UTC, band, mode and report.
- Logbook Where you record your contacts, on paper or in logging software.
- Loop An antenna made from a closed loop of wire. Small magnetic loops are popular where space is tight.
- Lowpass A low-pass filter passes lower frequencies and blocks higher ones, cutting harmonics from a transmitter.
- LSB Lower sideband. By convention hams use LSB for voice on 40, 80 and 160 meters.
- Lunar Moonbounce (EME): hams bounce signals off the Moon to talk to each other.
M
- Mast A pole that holds an antenna up in the air.
- Meteor Meteor scatter: bouncing VHF signals off the ionized trails that meteors leave in the upper atmosphere.
- Meter An instrument that measures something, like an SWR meter. Ham bands are also named in meters (20 meters).
- Mobile Operating from a vehicle.
- Mode How information rides on a signal. CW, SSB, FM and FT8 are all modes.
- Morse Morse code: letters sent as short and long signals (dits and dahs). Hams call it CW.
N
- NCS net control station
- Net An on-the-air meeting at a set time and frequency, run by a net control station.
- NIL nothing; I have nothing for you
- Nodes Points in a network, like repeater-linking nodes or mesh network nodes.
- Noise Unwanted signals that cover up the ones you want to hear, like hum from power lines.
- Notch A notch filter removes one narrow frequency, like a carrier whistle.
- NR number
- Null The direction where an antenna hears or sends the least. Turning a null toward an interfering signal can make…
O
- Offset The gap between a repeater's input and output frequencies, such as 600 kHz on 2 meters.
- Ohm The unit of resistance and impedance. Most radios and coax are built for 50 ohms.
- OM old man
- OP operator
- Orbit Ham satellites orbit Earth. You can talk through some of them with a handheld radio.
- OT old-timer
P
- Packet Packet radio: digital data sent in short bursts. APRS runs on packet.
- Paddle A Morse key with side levers. Used with an electronic keyer to send dits and dahs.
- Park In Parks on the Air (POTA), operators set up in parks to make contacts while others chase them from home.
- Peaks Mountain summits for SOTA (Summits on the Air) activations.
- Phone In ham rules, 'phone' means voice modes like SSB and FM.
- Pileup A crowd of stations all calling one rare station at the same time.
- Plugs Connectors on the ends of coax. The PL-259 is the classic HF plug.
- Power How much energy your transmitter puts out, measured in watts.
- Preamp A preamplifier that boosts weak received signals before they reach the receiver.
- PSE please
- PTT Push to talk: the button you press to transmit.
Q
- QRG your exact frequency is…
- QRL I am busy / is this frequency in use?
- QRM Q-code for interference from other stations.
- QRN Q-code for natural noise, like static crashes from lightning.
- QRO increase power
- QRP Low-power operating. Hams usually mean 5 watts or less.
- QRQ send faster
- QRS send more slowly
- QRT stop sending
- QRU I have nothing for you
- QRV I am ready
- QRX I will call you again at…
- QRZ Q-code for 'Who is calling me?'
- QSB Q-code for fading: a signal going up and down in strength.
- QSK break-in between signals
- QSL Q-code for 'I confirm receipt.' A QSL card confirms a contact.
- QSO Q-code hams use for a contact: a two-way exchange with another station.
- QSP I will relay to…
- QST general call to all amateurs
- QSX I am listening on…
- QSY change frequency
- QTC I have messages for you
- QTH Q-code for your location.
- QTR the time is…
- Quad A beam antenna made of wire loops instead of straight rods. Each loop is about one wavelength around.
R
- Radial A wire spread out from the base of a vertical antenna to form its ground system.
- Radio Communication using electromagnetic waves. Ham radio is the licensed amateur version.
- Ragchew A long, relaxed conversation on the air, as opposed to a quick contest contact.
- Range How far your signal reaches. VHF range depends mostly on antenna height.
- Ratio SWR is the standing wave ratio: how well your antenna matches your feedline.
- RCVR receiver
- Relay Passing a message along. The ARRL is the American Radio Relay League, named for relaying messages station to…
- Rig Your radio. Hams call their transceiver a rig.
- RIT Receiver incremental tuning: lets you move your receive frequency a little without moving your transmit…
- Rotator A motor that turns a beam antenna to point it in a direction.
- Rotor Hams' name for the motor that turns a beam antenna to point it in a direction.
- RPT repeat
S
- Scatter Bouncing signals off something to reach beyond line of sight, like meteor scatter or tropospheric scatter.
- Scope An oscilloscope, or a radio's band scope that shows signals across the band.
- SDR Software defined radio: a radio where much of the work is done by software instead of hardware circuits.
- Shack A ham's radio room, wherever the station lives.
- Shield The outer braid or foil of coax that keeps the signal in and noise out.
- Shift Repeater shift (offset): you transmit on one frequency and listen on another.
- Short A short circuit. Also a short antenna, which needs a loading coil to resonate.
- Simplex Transmitting and receiving on the same frequency, with no repeater in between.
- SK end of contact
- SKED schedule
- Skimmer A CW skimmer is software that decodes many Morse signals at once. Skimmers feed the Reverse Beacon Network.
- Skip Signals bouncing off the ionosphere and landing far away. The quiet gap before the first landing spot is the…
- Skywave A signal that travels far by bending back to Earth off the ionosphere.
- Smith The Smith chart: a graph engineers and hams use to work out impedance matching.
- Solar The sun drives HF propagation. Hams watch the solar flux index to see how the bands may do.
- Solder The metal alloy you melt to join wires and connectors.
- Spark The earliest radio transmitters used sparks. They have not been allowed on the air for decades.
- Speaker Many hams use an external speaker so signals are easier to copy.
- Split Transmitting on one frequency and listening on another, common when working rare DX.
- Spots Reports that a station was heard on a frequency, shared on DX clusters and POTA sites.
- Squelch A circuit that mutes the receiver when no signal is present, so you don't hear static.
- SRI sorry
- SSB Single sideband: the most common voice mode on HF.
- Stack Stacking two beams on one mast for more gain.
- Station Your whole setup: radio, antenna, power supply and everything else you use to get on the air.
- Storm A geomagnetic storm can disrupt HF propagation, but it can also bring auroras on VHF.
- Strap A wide copper ground strap bonds equipment together.
- Stub A short piece of feed line used to match impedance or block one frequency.
- Summit In Summits on the Air (SOTA), activators carry radios up qualifying summits to make contacts.
- Sunspot Dark spots on the sun. More sunspots usually mean better HF conditions, especially on the higher bands.
- Sweep An antenna analyzer sweeps across frequencies to show where your SWR is lowest.
- SWR Standing wave ratio: how well your antenna system is matched to your radio. 1:1 is a perfect match.
T
- TKS thanks
- TNC Terminal node controller: a box that turns a radio into a packet radio data station.
- TNX thanks
- Tone A sub-audible tone (CTCSS) that many FM repeaters need to hear before they pass your signal.
- Tower A metal structure that holds antennas up high. Height usually helps HF and VHF antennas.
- Trap A coil and capacitor in an antenna wire that act like a switch, letting one antenna work on more than one…
- TU thank you
- Tube A vacuum tube (valve). Older radios and many big amplifiers use tubes instead of transistors.
- Tuner An antenna tuner matches your radio to an antenna that isn't 50 ohms.
U
V
- Valve The British word for a vacuum tube.
- VFO Variable frequency oscillator: the circuit behind your radio's tuning knob.
- Voice Talking on the radio, using modes like SSB, FM or AM.
- Volt The unit of electrical pressure. Most mobile and base radios run on about 13.8 volts DC.
- Voltage Electrical pressure, measured in volts.
- VY very
W
X
Y
0–9
No matching word. Try a shorter search.
Meanings come from the word lists of our games. Q-codes, prosigns and CW abbreviations cite the ARRL; plain-English meanings are from the 73QRZ Games word list.